INDUSTRIAL METALWORKING LUBRICANTS

Phone: 817-293-4645

FAX: 817-293-4646

Duracote T-846 

Home ] Contact ] What's New ! ]

 

Home
Up
Maxim Products
Maxim Product Codes
SDS Request
Technical Support
Quality Assurance
Inside Maxim
Business Opportunity

 

 

DURACOTE T-846

 

DURACOTE T-846 is a solvent cutback corrosion preventive compound.  The dry film is firm, amber, translucent, and non-tacky.

DURACOTE T-846 is approved under Military Specifications MIL-C-16173D, Class 1, Grade 4, QPL Reference Number EES070128, and MIL-P-116J, Type P-19.

LABORATORY DATA T Y P I C A L   P R O P E R T I E S  

  ENGLISH METRIC
Flash, PMCC*, Minimum 106 deg.F 41.1 deg.C
Density, Weight/Gallon @77deg.F (25deg.C) 7.2 +/-1 lbs./gallon 863 grams/L
API Gravity @ 60/60 28 +/-2    
Specific Gravity @ 60 deg.F (15.6 deg.C) 0.86    

Recommended Dry Film Thickness over Metal Profile

1.0 mil 25 microns  
Theoretical Coverage @ recommended DFT 740 sq.ft/gallon 18.2 sq.meters/L
Non-Volatile % by Weight 52 +/-3  
Non-Volatile % by Volume 46 +/-1  
Volatile Organic Content (V.O.C.) 3.75 lbs./gallon 449 grams/L

Approximate Dry-to-Touch time @ 77 deg.F (25 deg.C)

4 hours    
Cure Time 24 hours    
Resistance to Flow per MIL-C-16173D Pass    

Accelerated Corrosion Tests:  

bullet

5% Salt Spray (Hours) ASTM**B-117 @ recommended DFT 1000 (2x4x1/8 in. Polishd Steel Panels)100% Relative Humidity (Hours)

bullet

ASTM D-1748 @ Recommended DFT 1000 (2x4x1/8 in. Polished Steel Panels)

bullet

*PMCC (Penske Martin Closed Cup **ASTM (American Society for Testing and Materials)  

SURFACE PREPARATION: The maximum performance of DURACOTE T-846 can be achieved only when the metal surfaces to be protected ar e clean, dry, and free of rust, oil, and mill scale

MAXIM  recommends that the metal substrate temperature be 40 - 95  deg.F (5 - 35 deg.C) at the time of product application.

APPLICATION: DURACOTE T-846 is formulated to be used as supplied.  

DO NOT THIN DURACOTE T-846.  Incorrect thinning will affect film build, dry time and productperformance.  MAXIM recommends that the ambient and product temperature be

40 - 95 deg.F (5 - 35 deg.C) at time of application.  Do not apply heat; fire or explosion may result  DURACOTE T-846 can be applied by spray or dip.

REMOVAL: DURACOTE T-846 can be removed with naphtha or harsh petroleum solvent.

CAUTION:  DURACOTE T-846 cures by solvent evaporation.  Use with adequate ventilation.  Adequate ventilation is required for cure  and to ensure against formation of an explosive atmosphere.

THE PARTIALLY CURED FILM SHOULD NOT BE EXPOSED TO IGNITION SOURCES SUCH AS FLARES, FLAMES, SPARKS, EXCESSIVE HEAT OR TORCHES.  Refer to

 Maxim's MSDS for additional handling and first aid information.

NOTE: The addition of any product over or under this coating is not recommended.  The use of additional coatings could result in chemical incompatibility, thus adversely affecting the

 performance of this coating as stated in the lab data section. For any questions, or information needed, please contact your MAXIM representative.

 

For additional information,  product samples,  etc., please contact;

  

MAXIM OIL & CHEMICAL COMPANY

Fort Worth Texas

Metro (817)  293-4645

DISCLAIMER

Information contained herein is believed to be correct and reliable.  However, Maxim Petrochemical Corporation does not assume liability for it or for recommendations of our representatives inasmuch as conditions and methods of use are beyond our control.  Further, we make no warranty, expressed or implied, of any kind regarding those products or their use and purchaser assumes all risks of use or handling either in accordance with directions or not

MANUFACTURER DISCLAIMER

The information and recommendations contained herein are, to the best of the knowledge and belief of Maxim Petrochemical Corporation, accurate and reliable as of the date issued.  Maxim does not warrant or guarantee their reliability, and Maxim shall not be liable for any loss or damage arising out of use thereof.

The information and recommendations are for the user's consideration and examination.  Conditions of use are beyond Maxim's control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risk of their use, handling, and disposal of the product(s).  This information relates only to the product(s) designated herein and does not relate to its use in combination with any other material or in any other process.

  

 

                                                                                                             [Home] [Up]

                                                                                                                Back To Top

                                                                                                           

                                                                                                                                        Copyright 2008 Maxim Petrochemical Corporation
                                                                                                                                       Last modified: August 19, 2016